Why Does My Furnace Have No Pilot Light?

When a pilot light occasionally goes out, it isn’t a serious issue. However, if your pilot light goes out repeatedly or doesn’t relight, it may indicate a bigger problem. The purpose of this post is to explain why your pilot light went out, what it might mean, and how to fix it. Relighting your pilot light is an important skill to have as a homeowner.

The process isn’t difficult, and your furnace may include instructions to help you. It is always recommended that you leave furnace repair, installation, and maintenance issues to the experts. GE Home Services is here to help for furnace repair in Phoenix and the surrounding areas. A DIY can cause injury or damage to your home or furnace if you do not have the proper training.

Why Would My Pilot Light Go Out?

There are several reasons why your pilot light may go out. The causes of some problems can be rectified quickly, while others require a little more effort.

Airflow Issues

A small gust of air may blow out your pilot light. It is possible to relight your pilot light or call a professional for assistance in this case. You may notice this if a strong wind or one of your furnace ducts leaks air. It can cause a draft or allow wind into your furnace if your flue or chimney is damaged, improperly installed, or not sized correctly.

Your Gas Has Been Shut Off

The pilot light relies on natural gas to stay lit, so if the gas is shut off, the light will go out. It is as simple as turning your gas back on and relighting your pilot light yourself.

Your Furnace Needs Cleaning

Pilot orifices are small holes in gas pipes that supply pilot lights with fuel. If they are dirty, they can interfere with the pilot light’s ability to burn. The pilot light may not be able to get enough fuel to sustain itself if it keeps going out. Pilot lights should be bright blue, not red or yellow.

A red or yellow flame indicates that your pilot light isn’t receiving enough fuel. You can even reduce your heating bill by regularly keeping your furnace clean, reducing wear and tear on its components. At least once a year, you should have a professional perform a maintenance appointment and duct cleaning on your furnace.

A Loose Or Faulty Thermocouple

When your pilot light fails to turn on, it may signify that your thermocouple has become loose or faulty. If this is the case, the thermocouple will need to be tightened or replaced.

A Temporary Gas Shortage

There is a possibility that the problem is not with your furnace at all. As a result of high natural gas demand, the supply may be stretched, leaving a little less to go around. You may lose your pilot light if your furnace cannot receive enough natural gas. Contact GE Home Services for a professional furnace repair in Tempe, AZ and the surrounding areas.

Conclusion

Consult with one of our professionals for HVAC repair in Tempe, AZ, when in doubt. If furnace maintenance or repair work is not done properly, carbon monoxide will be leaked. Everyone isn’t a furnace repair expert, so if you need help navigating your furnace, GE Home Services is here to help.

8 Tips on Choosing a Furnace Repair Service for Homeowners

Blog / By GE Home Services

Choosing the right HVAC contractor is essential when you need heating and air conditioning services. You need to work with the right company to get the best ser

How to Choose a Furnace Repair Service for Homeowners?

What is the best HVAC company to hire for HVAC repair in Tempe, AZ?
Follow these tips to hire the right contractor to work on your heating or air conditioning system.

Conduct Thorough Research

To begin with, do thorough research before hiring an HVAC company to install, repair, or service your heating or air conditioning unit. Check licenses, bonds, insurance requirements, and company certifications.

On-Time Service

Prompt service is essential when performing urgent repairs on your system and punctuality. While you wait for the maintenance specialists, would you want your employees or family members to suffer exposure?

Safety Top Priority

Other hazards, such as carbon monoxide and leaking gas, could endanger your family. For furnace repair in Tempe, AZ, professionals are well-trained to spot such hazards and respond appropriately.

License

If you hire an unlicensed, untrained business or do it yourself, you may put yourself and your family at risk. A licensed surety bond protects against dishonest business practices and financial protection if something goes wrong.

Consult Friends and Family

Recommendations can help you narrow your preferences and find a reliable local HVAC company. If you are considering hiring an HVAC contractor, ask three former customers for referrals. Ask all the questions you want to know about the references.

This way, you can ensure that your choice of contractor will result in successful business transactions. By providing personal experiences of people who have previously hired technicians for heating services in Tempe AZ, it is ensured that the information provided is accurate.

Obtain A Written Estimate and Multiple Quotes

It can give you an idea of how much you should spend on repairs. You should identify at least three potential technicians to consider so that you have various options to choose from. You can then consider credentials, availability, and price.

Find An Honest And Reliable Firm

Your house needs a reliable heating and air conditioning system to be comfortable and efficient. Maintaining and paying attention to your system helps safeguard its value and keep it functioning at its best.

24/7 Emergency Service And Warranties

A reputable company will have an emergency line to handle any situation seven days a week. The HVAC professional will inspect your duct system for leaks and insulation and measure the airflow to ensure it meets manufacturer specifications.

Be sure to ask what assurances, warranties, and after-sales services are available. Understanding what’s covered and what’s not is crucial because warranties differ.

Conclusion

Search online for heating repair near me to get in touch with our team. Your furnace keeps your home warm and your family comfortable all winter. Keeping it in good working order requires regular maintenance.

Schedule HVAC service through Ge Home Services.
We perform routine furnace maintenance so that you can avoid unexpected – and inconvenient – breakdowns. Contact us today.

The Best Way to Get Your Heating System Ready For The Winter

Blog / By GE Home Services

It’s most suitable to service your furnace before summer so that your HVAC can function properly throughout the winter. Autumn is difficult to schedule furnace service and repairs, and the last thing you need is a central heating system failure in the middle of a winter’s night.

Tips to Make Your Heating Winter Ready.

Change Your Air Filter

A dirty filter can cause your system to work harder and may even result in a system shutdown requiring emergency service. Boiler-equipped homes are cleaned of dust and dirt, dampers and exhaust fans are checked for proper operation, fireboxes and heat exchangers are inspected, and sediment is drained from the boiler. Get in touch with a professional for heating repair in Phoenix if you are facing any issues with your unit.

Clear Outside Exhaust Vents And Chimneys

Ensure chimneys and vents are not blocked while the weather is still favorable. A blocked chimney or vent can result in dangerous carbon monoxide backup in your home, which is one of the first things we do when performing pre-season maintenance for our customers.

Lower Your Thermostat

Lowering the room temperature a couple of degrees during cold weather can relieve some pressure on your heating system. In rarely used rooms, turn down the thermostat if you have a multi-zone system. A smart thermostat can control the areas you want to keep warm while reducing oil and gas consumption.

Close Vents In Unused Rooms

Many heating systems have vents in areas like attics, basements, and crawl spaces that are rarely used. Keeping these vents closed will keep warm air circulating where you need it most. It is important to keep heating vents open in areas where exposed pipes are located so that they will not freeze.

The last line of defense against carbon monoxide is a carbon monoxide detector. Whenever you fall, make sure it is at least five feet off the ground. Talk to a professional for furnace repair Phoenix.

Test The Igniter Switch

Make sure you test your igniter switch yearly, whether your system has an electronic igniter or a pilot light. The owner’s manual for your unit will provide instructions.

Service the blower motor

Check your owner’s manual to see if your blower motor needs to be cleaned or lubricated regularly. Typically, you’ll need to remove the cover, clean the bearing caps. And then remove the caps and lubricate the bearings.

Schedule A Pre-Season System Tune-Up

Make sure your home heating system is ready for winter with a professional tune-up by expert heating technicians. As part of our detailed checklist, we change the air filter, check the thermostat, and vents, lubricate moving parts, tighten electrical connections, and check air ducts for leaks.

Conclusion

Search online for HVAC repair In Tempe, AZ to get in touch with our team. Your furnace keeps your home warm & your family comfortable all winter and the key to keeping it in good working order requires regular maintenance.

By performing routine furnace maintenance, you can avoid unexpected – and inconvenient – breakdowns. Schedule HVAC service through Ge Home Services. Contact us today.

7 Tips on Preparing Heating Systems for the Winter

Blog / By GE Home Services

Winter is just around the corner, so you’ll want to ensure that your home and heating system are ready. Whether using a furnace or heat pump, you don’t want to be left in the cold without warning.

Tips on Ensuring That Your Heating System is Ready For Winter.

Replace Your Air Filter

The filters in your HVAC system collect dust, dirt, and allergens, whether you regularly clean them or not. You should replace your air filter every one to three months if you live with someone who suffers from allergies.

In addition to improving the quality of your home’s air, changing your air filters and maintaining your HVAC system may also increase its efficiency. Start fresh with a brand-new filter before the temperatures drop and prior to using your heating system more frequently.

Clean And Inspect Your Chimney

Before you start your first fire of the season, clean and inspect your chimney, it is possible to cause a fire when heavy soot builds up in the chimney.

It is also possible for your chimney to be clogged with leaves, tree branches, or a bird’s nest. Before hunkering down for the season, hire heating services in Tempe, AZ, to thoroughly clean your chimney.

Clean Your Furnace And Vents

A dirty furnace and obstructed vents can pose a fire risk when you heat up. Keep your family safe this winter by professionally cleaning your furnace and vents.

Professional Tune-Ups

To prepare your HVAC for winter, we recommend hiring a professional to perform an inspection and tune-up. They’ll have the right skills, tools, and knowledge to keep your heating system in good working order before winter arrives.

Test Smoke And Carbon Monoxide Detectors

You should install smoke and carbon monoxide detectors if you have an HVAC unit without them. When heaters are damaged or not working properly, they emit hazardous substances. Smoke can lead to short- and long-term health problems, including coughing and throat irritation.

Check your smoke and carbon monoxide detectors before turning up the thermostat to ensure they are working properly.

Test Your Thermostat

Check your thermostat before the temperatures drop and you’re desperate to stay warm. Ensure the heat kicks on, and everything works correctly by setting the temperature higher than the current room temperature. Even if it isn’t, you still have time to contact a local HVAC pro for furnace repair in Phoenix to troubleshoot it.

Consider Upgrading Your System

When your HVAC system is over fifteen years old, you may want to replace it with a high-efficiency model. Newer furnaces operate more efficiently and reliably, keeping your home warmer and more comfortable. You may save money and energy by installing a high-efficiency replacement in the long run.

Get in touch with GE Home Services for HVAC repair in Tempe, AZ. Our team is forever ready to help you with all furnace-related issues. We have trained staff who ensure that the work is done perfectly. Contact us today.

12 Tips to Help Your Furnace Work Better

Blog / By GE Home Services

For you to sleep comfortably and spend your day in a comfortable environment, your furnace requires a few things on your part to take care of it. Below are tips on how to maintain your furnace and keep it in top-notch condition.

Tips To Help Your Furnace Work Better.

Make Sure The Filters Are Clean

Furnace filters prevent dust and debris from entering the unit and clogging its components. Without regular filter replacements, your furnace and heating system will have to work harder to pull air through a clogged filter, reducing its efficiency.

Give The Furnace Plenty Of Space

For your furnace to function at maximum efficiency, it needs plenty of air circulation in its immediate vicinity. For efficiency and safety, keep a three- to the five-foot radius of space around your furnace at all times.

Clean Your Furnace Regularly

As with any appliance, your furnace can accumulate dust and debris on its operational components, negatively impacting its performance. That’s why annual furnace repairs in Phoenix are so important.

Keep Your Ductwork Clean

The ductwork in your home cannot circulate warm air as efficiently as it should if it is dirty and clogged. Consider scheduling HVAC repair in Tempe, AZ, before the winter weather hits if you haven’t had your last appointment in several years.

Ensure Ducts Are Intact And Properly Sealed

Your furnace has to work harder and longer to maintain the temperature. Set on your thermostat if air leaks out of the ducts before it reaches the rooms in your home.

Maintain An Appropriate Level Of Relative Humidity

When the air in your home is very arid, your furnace will have to work harder and longer to maintain a constant temperature. In winter, however, you can solve that efficiency issue by using a humidifier.

Make Sure Your Thermostat Is Set To Auto

It’s time to switch to the auto setting on your HVAC fan. This fan will stay on continuously when set, wasting energy if it is not needed.

Use The Sun's Warmth

Planting deciduous trees on the south & east sides of the house shaded the house during hot summer days. This is called passive solar. The sun’s warmth warms the house in the winter when the trees lose their leaves.

Set Ceiling Fans Clockwise

If you have the blades of your ceiling fans, you should rotate them clockwise for winter. Cool air will be drawn up, and you will push the warm air down the walls.

Make Sure All Registers Are Open & Free Of Debris

Air must be able to circulate freely around your home for a furnace to function efficiently. Make certain none of your registers are stopped by furniture or have dust trapped inside.

Decorative Insulation

Using carpets and area rugs on floors can help insulate against drafts. Also, because they’re so cozy looking, they feel wonderful underfoot, help with soundproofing, and make us feel warmer.

Use Curtains to Save Energy

You can reduce energy bills by strategically using your curtains. It is possible to prevent heat loss in the cold outdoors by closing them at night.

Get in touch with Ge Home Services for heating repair in Phoenix. Our team is forever ready to help you with all furnace-related issues. Contact us today.

10 Reasons Air Conditioner Smells Musty And How To Get Rid Of It

Blog / By GE Home Services

Every homeowner in Arizona loves the cool air an AC provides. Have you ever smelled something strange as soon as you switch on your air conditioning appliance? In this case, you should consult a professional and look for a professional air conditioning repair near me, via Google or any other reliable search engine.

Common Air Conditioning Smells And Ways To Resolve Them

Here are some prevailing air conditioning smells and measures to avoid them.

Car Exhaust Smell

An air conditioning system does not use an internal combustion motor to operate. A smell from your air conditioner indicates a leak in your refrigerant line. It is better to inspect the refrigerant levels and get them refilled from time to time.

Burning Gunpowder Smell

Your air conditioning unit contains numerous electrical components, such as circuit boards, power wires, fans, and condensers. In this case, turn off your AC unit immediately and seek advice from a local professional.

Rotten Egg Smell

A foul or rotten air conditioner odor usually gets induced by dead rodents or critters trapped in the AC. It is a different and distinct odor that cannot be confused with anything else. Birds and insects can nest or seek refuge in your ductwork, becoming trapped in the equipment.

Gas And Skunk Smell

This is the most concerning air conditioner odor on this list. It frequently indicates gas leakage within the framework. Since natural gas has no odor on its own, utilities and gas distributors add Methyl Mercaptan to give it a distinct odor. It ensures that any serious harm caused by gas leakage is detected immediately.

Moldy Or Musty Smell

The most prevalent foul odor of air conditioning appliances is stale and dingy. If your air conditioner smells musty, the most likely cause is a buildup of water in the drain pan or seep lines, which can allow fungus or mildew to grow.

Smoke-Like Smell

If you smoke at home, your air conditioner may eventually begin to smell like stale cigarette smoke. This disagreeable odor can trigger allergic reactions and headaches. Alter your air filter every 30 to 60 days and periodically clean your air conditioning appliance.

Chemical Smell

If you sense any foul chemical smell in the air, the odor could be of a sweet scent or paint thinner. In that case, the copper rings in the cooling unit fail in heat transfer or happen due to ice formation on the internal coils.

The Smell Of Burning Plastic

When you have a burning air conditioner smell or your air conditioning system smells like fish, there could be many problems like the motor overheating due to a faulty capacitor that you can resolve by lubricating the motor.

Vinegar-Like Smell

This smell usually emanates due to the high condensation rate and the drainage line blockage. The best solution is to inspect the air filters and replace or clean them often.

Burning Plastic Smell

Burning plastic smells usually arise due to broken capacitors or bad motor conditions. Therefore, if you smell burning plastic, turn off your AC and contact an electrician to find the issues responsible for this problem.

Looking for expert technicians for your AC repair in Phoenix? Our experts at GE Home Services are there to serve you. Contact us to book an appointment.

Do You Really Need To Get Central AC Service?

Blog / By GE Home Services

Have you ever been told that your air conditioner needs to be serviced? The truth is that you do need to have your central air conditioning unit serviced regularly.

It’s not just a way for HVAC companies to make money. Moreover, air conditioner maintenance is required at least once or maybe twice a year to keep the device in good working order.

The Benefit Of Central Air Conditioner Upkeep

The low expense of a regular conditioning tune-up will pay for itself in the form of fewer repairs, increased comfort, and a longer life for your home’s cooling systems. Here are some advantages of scheduling regular air conditioning upkeep by air conditioning repair Tempe AZ.

Improved System Efficiency

Routine AC service ensures that your unit is operating as efficiently as possible. Dirt and debris can accumulate on the coils and other elements of your air conditioning unit over time, causing it to work harder than necessary to cool your home.

Having your coils cleaned regularly helps to keep them clean. It will use less electricity and save money on your refrigerating bills.

Fewer Breakdowns And Emergencies

Another reason getting your air conditioning system serviced is essential is that it can assist in avoiding breakdowns and incidents.

When you have a professional inspect and service your unit, they will be able to detect any minor concerns before they become significant. That means you’re less likely to experience a power outage during one of the year’s warmest months.

Improved Indoor Air Quality

Regular air conditioning service helps keep your air quality at an optimal level. Being able to breathe simpler in your home is certainly something to be thankful for later.

In addition, keeping all elements clean and free of debris reduces your chances of dealing with mold or mildew inside your vents or around your HVAC system.

Higher Comfort

A well-maintained air conditioning system provides greater comfort for you and your relatives. When the system is at optimum efficiency, it can better regulate the temperature within your home, providing consistent cooling throughout.

Increases The Life Of Your Air Conditioner

Finally, and perhaps most importantly, regular AC service helps prolong your unit’s lifespan. You can control many of the issues that could contribute to an early breakdown by keeping it neat and well-maintained.

Having your AC unit serviced regularly is one of the best ways to safeguard your investment and guarantee that it endures as long as possible. When it comes to your next air conditioning ongoing maintenance, keep all these things in mind to ensure you never have to give up on your comfort.

Conclusion

Regular maintenance is a small investment that can help you save substantial time and funds in the long run. Preventive maintenance can save you a ton of money on unnecessary repairs. Various air conditioning services in Phoenix can help you with all your HVAC needs.

Looking for a dependable air conditioning service near me? Our technicians at GE Home Services LLC are there at your service. To schedule an AC upkeep appointment, call us at 480-376-0755 or send us an email.

How Energy Efficient Is Your AC Use?

Blog / By GE Home Services

Whether you have central AC or a heat pump system, owning an energy-efficient air conditioner is easier. Developing energy-efficient AC practices can save you money on utility bills while, lowering the environmental impact and the need for frequent AC repair near me services.

What Is An Energy-Efficient Air Conditioner?

Electronic appliances, such as an AC, can perform their functions to their maximum capabilities while using less electricity than other conventional appliances, they are energy efficient. When it comes to an energy-efficient AC method in your home, it is essential to consider all the things contributing to the operation of your system and its results.

When determining the efficiency score of your AC system, consider the type of air conditioning unit you have, the type of windows and doors you have, the situation of your ducting and vents, and other factors.

Tips To Make Your Air Conditioning Appliance More Efficient

Below are some ways to make your cooling appliance more energy efficient:

Increase The Air Conditioner Effectiveness By Retrofitting

In the first step of air conditioning efficiency recommendations, you must focus on retrofitting. Retrofitting is an excellent way to keep your air conditioner running efficiently. Your air conditioner may need to be retrofitted, so you should consider adding modern technology or characteristics to your older air conditioning system.

You should consider retrofitting by repairing your old unit or moving to a new place and not seeing the point in purchasing a brand-new system. You should also consider reconfiguring if you need some time before investing in a new system or if you want to improve your air conditioner energy effectiveness and overall comfort.

Lower Heat Gain

If you’re wondering how to make your air conditioning system operate more efficiently, one option is to reduce heat gain. Next, reduce the thermal gain to improve the efficiency of your air conditioner.

If your home leaks, it will be challenging for your air conditioner to cool it effectively. However, if your home is older, higher are the chances that it has never been air-sealed. Air sealing your residence will help heat gain, especially if you have ceiling spills because heat rises.

Temperature Settings And Configurable Controls

Do you frequently forget to lower your thermostat? This can happen to anyone. Having an automation process can assist you in improving your HVAC energy efficiency.

This system can control your thermostat as well as your lights. You can also easily configure your system so that your air conditioner turns on and off according to your preferences.

Conclusion

When you substitute a device at least ten years old, you can double or even quadruple your return on investment. SEER ratings on newer AC models are high.

Are you planning a repair or air conditioning service in Phoenix, AZ? Our experts at GE Home Services LLC are here to help.

For more details, call us at 480-376-0755 or email us your queries for immediate response. Contact us today to know more about our HVAC services.

AC Drain Line Blocked? Fix-It Like a Pro in No Time!

Blog / By GE Home Services

The accumulation of water is one of the early and most obvious signs that the AC drain line for your air conditioner has become clogged. A clogged AC drain line is not to be taken lightly, as it can lead to major water damage in your home, including the growth of mildew and the weakening of the foundation.

If you believe that the drain line for your air conditioner is clogged, read the following tips to evaluate whether you can resolve the issue. If you cannot remove the obstruction, Google ‘air conditioning repair near me’ and contact a reputable company and they will gladly handle the situation for you.

What are the Root Causes of a Clogged AC Condensate Drain Line?

Since the drain line is an enclosed and wet location, mold, mildew, and sludge are likely to build colonies. This makes the area a proper habitat for these species. Additionally, dirt, debris, and even insects may enter the structure. These things can clog the AC drain line if they are not regularly emptied.

If you do not swiftly remove the obstruction, water will accumulate in your condenser pan, eventually causing it to overflow. Even worse, water can begin to get into your unit’s inside evaporator pan, which has the potential to cause damage to both your system and your home. This will require you to search for AC repair near me.

How Do You Unclog Your AC Drain Line?

Switch off the Air Conditioner

When you evaluate your home’s clogged AC drain line, switch off the power to the system, even if it is not currently running. Your safety and the HVAC system’s protection from additional damage caused by condensate necessitate this precaution.

Locate the Drain Line

A drain pipe is a PVC pipe, and it is normally located in the vicinity of your condenser unit outside. If the drain pipe is already full, you may require a bucket at this point.

Remove the Cover

Remove the cover from the pipe’s end. No tools are needed to do this. It can be released by simply pulling it off with your hands.

Evaluate the Blockage

Examine the air conditioner’s drain pipe to determine whether there is an obstruction. Wear protective gloves while manually removing the block from the line if you can identify the cause and do so safely. If the obstacle is too far down, move to the subsequent stage, which is further down. Avoid pushing the impediment further into the pipe.

Flush With Vinegar Solution

Due to vinegar’s acidity, it can be used as a cleaning agent. AC tune-up in Phoenix uses this method. You may dilute the smell of vinegar by combining it with soap and hot water. After removing the cover from the drain line’s opening, pour a quarter cup of white, regular, distilled vinegar down the drain line via the opening. You are free to leave anytime the capacity is reached.

Clean the Drain Line

After the blockage has been eliminated, perform a thorough cleaning of the drain pipe using a commercially available cleaner designed specifically for PVC plumbing. If you inquire, the service technician from AC repair near me may demonstrate how you can clean the drain between routine maintenance visits by pouring a cup of a moderate cleaning solution such as distilled vinegar down the drain periodically.

Conclusion

Checking for and removing obstacles from a clogged drain line shouldn’t provide too many difficulties. You can verify that the drain line of your air conditioner is clean and exceptionally clear by following this simple cleaning technique and noticing these plain warning signs. However, continue to have difficulty analyzing and repairing a clogged drain line. It may be time to contact GE Home Services LLC, a professional air conditioning maintenance company, for all services related to air conditioning repair. Get in touch today!

7 Common Problems When You Select an Oversized AC

Blog / By GE Home Services

Even though it is very common for homes to have problems due to a defective air conditioning unit, it is also very common for homes to have problems due to an air conditioning unit that is too large. There are numerous potential reasons why air conditioning service units in Phoenix, AZ, may be excessively large. Numerous things, such as the area of your home and the environment in which you live, can lead to problems with an oversized air conditioner.

Common Problems With an Oversized AC

Shorter Lifespan

The easiest approach to ensure that your air conditioner will last for many years is to choose a unit that is proportional to the square footage of your home. On the surface, a larger unit may appear to be the superior alternative. Conversely, an oversized air conditioner will face accelerated wear and tear, and as a result you’ll have to Google ‘AC repairs near me’ to remedy the issues.

Repair Costs

A portion of the prematurely occurring severe wear and tear can be attributed to the short cycle. Due to these transient power surges, your air conditioner will not have a long life span, resulting in greater AC repair in Tempe, AZ.

Expensive Bills

A major disadvantage of having an excessive unit for most homes is how it raises your cooling costs. You may imagine that a larger unit will require less work and energy to cool your home, but the opposite is true.

This is especially true during the hottest parts of the summer when the unit will work an order of magnitude harder than properly sized units. Many of these conditions do not even result in enhanced cooling; rather, they result in an uncomfortable home that is too cold in some areas and too warm in others. Contact air conditioning services near me to know if your AC is oversized.

Structural Damage

This is especially true in regions where air conditioning services in Phoenix, AZ, are useful for managing excessive humidity levels. Because it does not remove enough moisture from the air, a large air conditioner can have devastating effects on the property in which it is put. Excess humidity can be detrimental to wood products, paint, and drywall.

Short Cycling

Have you noticed that your air conditioner shuts off once the ideal temperature is reached? This issue, often referred to as short cycling, is one of the most common problems with large air conditioners. It increases the cost of your electricity bills and the amount of wear and tear on your system and AC repair near me.

Inconsistent Temperature

When using an oversized air conditioner for the space, the rooms farthest from the thermostat do not reach the desired temperature before the unit goes off. As a direct result, the temperature in your home changes significantly from room to room, and certain regions are perpetually excessively hot.

Internal Humidity

Even if the air in your home appears to be saturated with moisture, you may not need a dehumidifier. Alternatively, it may indicate that your air conditioner is too large for your home. Due to the inability of your air conditioner to run on regular cycles, the cycles it does run will not be long enough to remove humidity from the air effectively. To efficiently cool and dehumidify the air in your home, each air conditioner cycle should run between twenty and thirty minutes.

Conclusion

Regarding your air conditioning system, size does not always equate to superiority. To guarantee that your gadget operates without any issues, you must always verify that the size you choose is suitable. GE Home Services LLC can assist you if you require assistance with your HVAC system. Before you search Google rigorously for ‘air conditioning services near me’, give us a call.